Request Information Download PDF
Model NumberGTMG3075P-10VV-X.X-FW
DescriptionGTMG3075P-10VV-X.X-FW, Medical Power Supply, Open Frame/Internal, Open Frame Medical Power Supply, , Input Rating: 85 ~ 264VAC, 125 ~ 373VDC (47 ~ 63Hz), , Output Rating: 10 Watts, 5 ~ 24V in 0.1V increments, Approvals: CE China RoHS cUR GOST-R RoHS 2 Ukraine WEEE Double Insulation VCCI
Agency Documents
CE EC-Declaration for Medical
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TypeOpen Frame/Internal
TechnologyOpen Frame Medical Power Supply
CategoryMedical Power Supply
Input Voltage85 ~ 264VAC, 125 ~ 373VDC (47 ~ 63Hz)
I/P Amps (A)0.25A / 115VAC, 0.15A / 230VAC
Wattage (W)10
Vout Range (V)5 ~ 24
Ingress ProtectionIPX0
Size (mm)45x22x65
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTMG3075P-1005-FW 5210 RFQ
GTMG3075P-1012-FW 120.839.96 RFQ
GTMG3075P-1015-FW 150.669.9 RFQ
GTMG3075P-1024-FW 240.4210.08 RFQ
Universal AC input / Full range
Medical safety approval: ANSI / AAMI ES 60601-1 / TUV EN 60601-1: 2006; IEC 60601-1 / 2xMOPP
Isolation class Ⅱ
Green design, No-load power consumption < 0.3W
Protection: Short circuit, Over load, Over voltage
Brown-out (Low AC Input Voltage)
High operation temperature up to 70°C
Withstand 2G vibration test

DC Voltage Range: 5V 12V 15V 24V
Rated Current: 2A 0.83A 0.66A 0.42A
Current Range: 0 ~ 2A 0 ~ 0.83A 0 ~ 0.66A 0 ~ 0.42A
Rated Power: 10W 9.96W 9.9W 10.08W
Ripple & Noise (Max.): 80mVp-p 150mVp-p 150mVp-p 240mVp-p
Voltage Adj. Range: ±10%
Voltage Tolerance: ±2% ±1% ±1% ±1%
Line Regulation: ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation: ±1% ±0.5% ±0.5% ±0.5%
Setup, Rise Time: 100ms, 25ms / 230VAC, 100ms, 25ms / 115VAC at full load
Hold Up Time: 100ms / 230VAC, 25ms / 115VAC at full load

Voltage Range: 85 ~ 264VAC, 125 ~ 373VDC
Frequency Rangev 47 ~ 63Hz
Efficiency (Typ.) at 230VAC: 77% 79% 80% 82%
AC Current (Typ.): 0.25A / 115VAC, 0.15A / 230VAC
Inrush Current (Typ.): Cold Start 25A / 115VAC, 45A / 230VAC
Over Load: Above 110% rated output power, Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage: 115 ~ 145% rated output voltage, Protection type: latch-off mode

Working Temp.: -20 ~ +70°C (Refer to load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.03% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC
Safety Standards: Certified UL / cUL (ANSI / AAMI ES 60601-1; CAN / CSA-C22.2 No.60601-1); NFPA 99
Certified TUV (EN 60601-1; IEC 60601-1); MOPP approval
Withstand Voltagev I/P-O/P: 4KVAC
Isolation Resistance: I/P-O/P: 100M Ohms / 500VDC
EMI Conduction & Radiationv Certified EN 55011
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 60601-1-2; IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF : 210.2K HRS Certified MIL-HDBK-217F
Dimension (WxHxD): 45x22x65 mm / 1.771x 0.866x2.559 inch
Packingv 0.045kg; 108pcs / 5.86kg / 1.43CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Length of setup time is measured at first cold start. Turning ON/OFF the power supply continuously may increase the setup time.
Derating CurveUser-added image

Qty (ea.)/Carton108
Individual Box/Gift Box Size (mm)70*27*50
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)5.86
Label Width (mm)30.0
Label Height (mm)20.0
Input Configuration
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Mark: tested to comply with EN61000-3-2, EN61000-3-3 and EN50082-1, including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61001-1-2-2007 EMI: Complies with EN55011 CLASS B and FCC Part 15 B
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added imageUR 60601-1, 3rd Edition, CAN/CSA-C22.2 No. 601.1-1
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
GOST-R mark for Russia(Document: 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
236635120.852 PCB Pins Ø1.1mm X 3.5mm length, 20.4mm center to center spacing between pins