DOE EPS 2.0 Level VI Power Supply / Charger, 5v, 1.0A, for North America with integral USB Jack (GT-83083-0505-USB-W2)

Request Information Download PDF Configure Output Connector

DOE EPS 2.0 Level VI Power Supply / Charger, 5v, 1.0A, for North America with integral USB Jack

Information

Model Number

GT-83083-0505-USB-W2

Description

GT-83083-0505-USB-W2, ITE Power Supply, Wall Plug-in, AC/DC Switching Adapter with USB Power Supply AC Adaptor, , Input Rating: 100-240V ̴ , 50/60Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 5 Watts, 5V in 0.1V increments, Approvals: Double Insulation Level VI PSE RoHS VCCI WEEE LPS cULus CB

Agency Documents

http://www.globtek.info/certs/GT-83083-USB-W2Z/

CE EC-Declaration for Medical

Contact GlobTek for more information

CE EC-Declaration for Industrial/Commercial/ITE

http://globtek.force.com/models/ec_declaration?id=a0Oa000000MEmurEAD

CE EC-Declaration for Household

Contact GlobTek for more information

RoHS/RoHS3 Declaration

http://www.globtek.com/pdf/rohs_cert/a0Oa000000MEmurEAD

REACH Declaration

http://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

http://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Wall Plug-in

Technology

AC/DC Switching Adapter with USB Power Supply AC Adaptor

Category

ITE Power Supply

Input Voltage Range (V)

100-240V ̴ , 50/60Hz

Max Input Current (A)

0.2A

Max Output Power Rating (W)

Output Voltage Range (V)

Efficiency

Ingress Protection

Size (mm)

47.72*36.0*22.5 +/-0.5

Enclosure

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)	RFQ
GT-83083-0505-USB-W2*	5	1	5	RFQ

* (Final ordering #/Part No to be defined)

Specifications

01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector measured at the end of a 0.6 meter USB cordset employing #22 Gauge conductors
04. Line Voltage Regulation: +/- 1% typical measured at the output connector measured at the end of a 0.6 meter USB cordset employing #22 Gauge conductors
05. Output Ripple (Vp-p): +/-1% or 100 mV whichever is greater measured at the end of a 0.6 meter USB cordset employing #22 Gauge conductors. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector.
06. Inrush Current: at full load, 25°C, cold start
07. Switching Frequency: 100 KHz typical, varies with line and load
08. Efficiency: 73.77% minimum at nominal input voltage average, Efficiency meet CEC Ⅴ, ERP：2009/125/EC

B) PROTECTION
01. Over-current protection: 1.5A maximum with auto-recovery function
02. Over-voltage protection: 10VDC maximum with zener clamp
03. Short-circuit protection:The adapter shall not be damaged by short the DC output to Ground.

C) SAFETY
01. Dielectric Withstand Voltage: Primary To Secondary: 3000VAC 10mA 1minute or 4242VDC 10mA 1minute
02. Leakage Current: 20uA maximum, at nominal AC input voltage and frequency
03. ESD Immunity per EN61000-4-2, ±8 kV contact, ±15 kV air, Perf Criteria A Standard.

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 50°C ambient temperature
03. Operating Humidity: 20 ~ 85 % RH. non-condensing
05. Storage Temperature: -20°C to 60°C
06. Storage Humidity:5 ~ 95 % RH. non-condensing
07. Cooling: Cooling shall be with natural convection cooling
08. RoHS 2: Complies with EU 2011/65/EU China SJ/T 11364-2014

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Markings: Label and/or Pad Printed and/or Molded in the case

Derating Curve

Qty (ea.)/Carton

360

Individual Box/Gift Box Size (mm)

42(L)*28(W)*72

Individual Box/Gift Box Color

White

Master Carton Size (mm)

432 x 350 x 233

Gross Weight (kg)

29.0

Label Width (mm)

30.0

Label Height (mm)

24.0

Input Configuration

Description

NEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.

Output Configuration

Common output connector options:
Click to add to your request.


L Type (Coaxial 5.5x2.5mm plug)	C Type (Coaxial 5.5x2.1mm plug)	K Type (Coaxial 3.5x1.3mm plug)	LL Type (5.5x2.5mm Locking 760k type)	CL Type (5.5x2.1mm Locking S761k type)	Magnetic Connector

YL3 Type (KPPX-3P)	YL4 Type (KPPX-4P)	EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)	MSB Type (Micro USB)	Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Logo	Description


	Attention Mark / Refer to operating manual for operating and service instructions
No Logo Applicable	CB report 60950-1 2nd Ed
	UL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
	Double Insulation - Mark is on the label or Molded in the case
	Indoor Use Only - Mark is on the label or Molded in the case
	Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPS	Limited Power Source
	JAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS	Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
	Japan: Voluntary Control Council for Interference (VCCI)
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case

Popular Products

SKU	Volts Out	Current Out (Amps)	Connector
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198485	5	1	Micro-B USB 5 Pin Type "B" or Equal
205696	5	1	Type "A" USB “JACK”, integral to power supply enclosure
271892	5	1	Type "A" USB “JACK”, integral to power supply enclosure
212542	5	1	Type "A" USB “JACK”, integral to power supply enclosure
241869	5	1	Type "A" USB “JACK”, integral to power supply enclosure
260004	5	1	Type "A" USB “JACK”, integral to power supply enclosure
199395	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
212542	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure
212542	5	1	Type "A" USB “JACK”, integral to power supply enclosure
212542	5	1	Type "A" USB “JACK”, integral to power supply enclosure
198060	5	1	Type "A" USB “JACK”, integral to power supply enclosure

News Releases

Title	Web Link
Level VI Compliant Power Supply / Charger from GlobTek with Integral USB Jack and North American Fixed Blade Offers 5Vo @ 1A!	http://en.globtek.com/news/level-vi-compliant-power-supply-charger-from-globtek-with-integral-usb-jack-and-north-american-fixed-blade-offers-5vo-1a
Level VI (6) Power Supplies Provide ESD Immunity to ±8 kV Contact, ±15 kV Air in 5W Wall Plug-in Fixed Blade Configuration!	http://en.globtek.com/news/level-vi-6-power-supplies-provide-esd-immunity-to-8-kv-contact-15-kv-air-in-5w-wall-plug-in-fixed-blade-configuration

GT-83083-0505-USB-W2 データシート

情報のご請求