Request Information Download PDF
Model NumberGT-G3085PWWWVV-X.X-C
DescriptionGT-G3085PWWWVV-X.X-C, ITE Power Supply, Enclosed-Metal, Single Output Power supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 100 Watts, 5-48V in 0.1V increments, Approvals:
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologySingle Output Power supply
CategoryITE Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)1.2A / 115VAC, 0.6A / 230VAC
Wattage (W)100
Vout Range (V)5-48
Ingress ProtectionIPX0
Size (mm)98 x 42 x 157.2
EnclosureUser-added image

Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-G3085P10005-C 520100 RFQ
GT-G3085P1007.5-C 7.513.5101.25 RFQ
GT-G3085P10012-C 128.5102 RFQ
GT-G3085P10013.5-C 13.57.5101.25 RFQ
GT-G3085P10015-C 156.7100.5 RFQ
GT-G3085P10024-C 244.2100.8 RFQ
GT-G3085P10027-C 273.8102.6 RFQ
GT-G3085P10048-C 481.9593.6 RFQ
UniversalAC input I Fullrange
• Built in active PFC function,PF > 0.90
• Green design,No-load power consumption < 0.1W
• Protection: Short circuit,Over load,Over voltage
Brown-out (Low AC Input Voltage)
• High operation temperature up to 70°C
• Withstand 2G vibration test
• 3 years warranty

DC Voltage Range: 5V 7.5\1 12V 13.5V 15V 24V 27V 48V
Rated Current 20A 13.5A 8.5A 7.5A 6.7A 4.2A 3.8A 1.95A
Current Range: 0-20A 0-13.5A 0-8.5A 0-7.5A 0 -6.7A 0-4.2A 0-3.8A 0 -1.95A
Rated Power: 100W 101.2W 102W 101.2W 100.5W 100.8W 102.6W 93.6W
Ripple & Noise (Max.): Note.2 100mVp-p 10DmVp-p 10QmVp-p 10DmVp-p 10QmVp-p 120mVp-p 12DmVp-p 20DmVp-p
Voltage Adj. Range: 4.5-5.5V 6.75-8.25V 10.8-13.2V 12.15-14.9V 13.5--16.5V 21.6-26AV 24.3--29.7V 43.2-52.8V
Voltage Tolerance: Note.3 ±2% ±1.5% ±1% ±1% ±1% ±1% ±1% ±1%
Line Regulation: ±0.5%
Load Regulation: ±0.5%
Setup, Rise Time: 1300ms, 100ms at full oad
Hold Up Time (Typ.): > 32ms /230VAC,> 10ms /115\/AC at fulload

Voltage Range: Note.4 90 ~ 264VAC, 127 ~ 370VDC
Frequency Range: 50/60Hz
Power Factor (Typ.):> 0.9/230VAC,> 0.98/115VAC at full load
Efficiency (Typ.): 83% 85% 85% 86% 88% 189% 189% 89%
AC Current (Typ.): 1.2A I 115VAC,0.6A /230VAC
Inrush Current (Typ.): 27A/115VAC,55A/230VAC
Leakage Current: < 2mA/230VAC

Over Load: >105% rated output power. Protection type: Hiccup mode
Over Voltage: 115- 150% rated output voltage. Protection type:latch-off mode
Over Temperature: 90 :1:5"C detect on NTC. ProtectiOn type:shut down o/p voltage, after temperahn goes down and re-power ON to recover

Working Temp.: -20- +70°C (Refer to output load de-rating curve) (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.02% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 1G 10min. / 1cycle, period for 60min. each along X, Y, Z axes Compliance to IEC 60068-2-6-2007

Safety & EMC
Safety Standards: Certified UL 60950-1; EN 60950-1
Withstand Voltage: I/P-O/P: 3KVAC (4242VDC), I/P-FG: 1.5KVAC (2121VDC), O/P-FG: 0.5KVAC (707VDC), 1min
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55022; EN 61000-6-3
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 61204-3; EN 55024; EN 61000-6-1, IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF: 691.81< HRS Certified MIL-HDBK-217F
Cooling: Air convection
Dimension (WxHxH)v 98x42x157.2 mm / 3.858x1.654x6.189 inch
Packing: 0.65kg; 24pcs / 16.6kg / 1.1CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. De-rating may apply in low input voltage. Please check the de-rating curve for more details.
5. In parallel connection, only one unit will operate if the total output load is less than 5% of the rated load condition.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Conduct this test without enclosure.
Derating CurveUser-added image
Qty (ea.)/Carton24
Individual Box/Gift Box Size (mm)170*110*45
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)TBD
Label Width (mm)90.0
Label Height (mm)30.0
Input Configuration
DescriptionTerminal Block
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
215875244.2(4) Position Terminal Block